Service manual

6-1
HVR-MRC1
6. ADJUSTMENTS
6-1. Reading/Clearing of History Information
The history information recorded in this set can be read and cleared by connecting the set to the PC with the i.LINK cable and using batch
files.
• Kind of history information
This set records the following history information:
1 Error codes (latest 10 codes)
2 Accumulated POWER ON time (in minute)
3 Accumulated recording time (in minute)
4 Accumulated playback time (in minute)
5 Accumulated files created
6 Accumulated CF card detection count
1-1. Connection and Power ON Method
• Connection Diagram
Fig. 6-1-1
Procedures
1) Attach the iLINK cradle (HVRA-CR1) to the set.
2) Connect the set to the PC with the i.LINK cable.
Note: Remove the Compact Flash card if it has been inserted in the set.
3) Slide the POWER switch of this set to ON.
4) Check that the LCD screen of the set changes from “Welcome” to a blinking state of CF icon as shown below.
Fig. 6-1-2
Icon is blinking
AC Adapter/Charger
(Connecting cord)
(DK-215)
HVR-MRC1
i.LINK cable
PC with
IEEE1394 terminal