Service manual

6-4
HVR-MRC1
9. Click “Have Disk”.
Fig. 6-1-8
10. Click “Browse”.
Fig. 6-1-9
11. Select “1394vdev.inf” copied to the PC and click “Open”.
Fig. 6-1-10
12. Click “OK”.
Fig. 6-1-11
13. Select “1394 Virtual Device” and click “Next”.
Fig. 6-1-12
14. Click “Next”. Then, the installation starts.
Fig. 6-1-13
Note: When driver is installed, personaol computer might be re-
set.
In this case, please proceed work from procedure 15 after
starting the personal computer.