Service manual

6-8
HVR-MRC1
1-6. Clearing of Accumulated POWER ON Time
Note: The following shows a case that uses the batch file of En-
glish version.
For Japanese version, use “POWER.bat”.
Procedures
1. Double-click “POWER_E.bat” copied to the PC.
2. The command prompt starts up.
Fig. 6-1-26
•To execute, press the [ENTER] key of PC. The clearing of accu-
mulated POWER ON time will be executed.
•To cancel, click “x” mark at the upper right of the command
prompt window to close the command prompt window.
3. When the clearing of accumulated POWER ON time finished,
the following message will be displayed in the command
prompt window.
Fig. 6-1-27
4. Press the [ENTER] key of PC to close the command prompt
window.
1-7. Clearing of Accumulated Recording Time
Note: The following shows a case that uses the batch file of En-
glish version.
For Japanese version, use “REC.bat”.
Procedures
1. Double-click “REC_E.bat” copied to the PC.
2. The command prompt starts up.
Fig. 6-1-28
•To execute, press the [ENTER] key of PC. The clearing of accu-
mulated recording time will be executed.
•To cancel, click “x” mark at the upper right of the command
prompt window to close the command prompt window.
3. When the clearing of accumulated recording time finished, the
following message will be displayed in the command prompt
window.
Fig. 6-1-29
4. Press the [ENTER] key of PC to close the command prompt
window.