Datasheet

Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 18 of 23
Cisco Catalyst 4500 Series Min/Max Ports
Line Card
Number of
Ports Port Speed Port Type Wire Rate
4503-E 4506-E/
4507R-E
4510R-E
WS-X4248-
FE-SFP
48 100BASE-X SFP Yes 48/96 48/240 48/384
WS-X4124-
FX-MT
24 100BASE-FX
(MT-RJ)
– Yes 24/48 24/120 24/168
WS-X4148-
FX-MT
48 100BASE-FX MMF
MT-RJ
Yes 48/96 48/240 48/384
WS-X4148-
FE-BD-LC
48 100BASE-
BX10-D
SMF
Single LC
Yes 48/96 48/240 48/384
Classic Fast Ethernet over Copper Line Cards
WS-X4124-
RJ45
24 10/100 RJ-45 Yes 24/48 24/120 24/168
WS-X4148-
RJ
48 10/100 RJ-45 Yes 48/96 48/240 48/384
WS-X4148-
RJ21
48 10/100 RJ-21 Yes 48/96 48/240 48/384
Classic Fast Ethernet PoE Line Cards
WS-X4224-
RJ45V
24 10/100 RJ-45 PoE
IEEE 802.3af
and Cisco
prestandard
Yes 24/48 24/120 24/168
WS-X4248-
RJ45V
48 10/100 RJ-45 PoE
IEEE 802.3af
and Cisco
prestandard
Yes 48/96 48/240 48/384
WS-X4248-
RJ21V
48 10/100 RJ-45 PoE
IEEE 802.3af
and Cisco
prestandard
Yes 48/96 48/240 48/384
* E-Series line cards require E-Series chassis.
** The amount of oversubscription can be controlled by varying the number of ports used at 1000 Mbps. All
ports can use Gigabit EtherChannel
®
or IEEE 802.3ad for high-speed interconnection applications. All
oversubscribed ports use the standard IEEE 802.1x flow control (PAUSE frame) mechanism to control Gigabit
Ethernet host traffic.
Table 3. X2 Options
Interface Type Name Max Distance Cable Type Part Number
10GBASE-LR 10GBASE-LR X2
transceiver module for
SMF, 1310-nm
wavelength, SC duplex
connector
10km SMF X2: X2-10GB-LR
10GBASE-SR 10GBASE-SR X2
transceiver module for
MMF, 850-nm
wavelength, SC duplex
connector
33m MMF X2: X2-10GB-SR
10GBASE-CX4 10GBASE-CX4 X2
transceiver module for
CX4 cable, copper,
InfiniBand 4X
connector
15m Copper InfiniBand X2: X2-10GB-CX4
10GBASE-ER 10GBASE-ER X2
transceiver module for
SMF, 1550-nm
wavelength, SC duplex
connector
40km SMF X2: X2-10GB-ER