Datasheet

2-12
Catalyst 6500 Series Ethernet Modules Installation Guide
OL-6265-02
Chapter 2 Ethernet Switching Modules
10/100 and 10/100/1000 Ethernet Modules
Maximum frame size • WS-X6148-GE-TX, WS-X6148V-GE-TX, and
WS-X6148-GE-45AF—Up to 1518 bytes per frame
• WS-X6148A-GE-TX and WS-X6148A-GE-45AF—Up to 9216 bytes
per frame
Supervisor engine support Supported by the following supervisor engines:
• Supervisor Engine 2
• Supervisor Engine 32
• Supervisor Engine 720
Queues per port WS-X6148-GE-TX, WS-X6148V-GE-TX, and WS-X6148-GE-45AF:
• Tx—1p2q2t (per 8 ports)
• Rx—1p2t (per port)
WS-X6148A-GE-TX and WS-X6148A-GE-45AF:
• Tx—1p3q8t
• Rx—1q2t
Chassis/slot restrictions No chassis or slot restrictions: the module can occupy any slot in any
Catalyst 6500 or Catalyst 6500-E chassis (all variants)
Bus connection Single connection into the 32-Gbps shared bus (all variants).
Module upgrades available
PoE support WS-X6148-GE-TX and WS-X6148A-GE-TX:
• The WS-X6148-GE-TX is field upgradeable with the
WS-F6K-VPWR-GE= daughter card that supports only the Cisco
prestandard.
• Both the WS-X6148-GE-TX and the WS-X6148A-GE-TX are field
upgradeable with the WS-F6K-GE48-AF= daughter card that supports
both the Cisco prestandard and the IEEE 802.3af standard.
Refer to the Catalyst 6500 Series Power over Ethernet Daughter Cards
Field-Upgrade Installation Note for field upgrade procedures.
Refer to Appendix A for additional information on the PoE daughter cards.
Distributed forwarding
support
Not supported.
Table 2-10 WS-X6148-GE-TX Features (continued)
Feature Description