Datasheet

2-68
Catalyst 6500 Series Ethernet Modules Installation Guide
OL-6265-02
Chapter 2 Ethernet Switching Modules
10-Gigabit Ethernet Modules
Module upgrades available
PoE support Not supported.
Distributed forwarding
support
Ships with the WS-F6700-CFC daughter card factory-installed. Can be
upgraded in the field to support dCEF with the installation of a DFC
daughter card (WS-F6700-DFC3A, WS-F6700-DFC3B, or the
WS-F6700-DFC3BXL).
Note Refer to the Catalyst 6500 Series DFC3A, DFC3B, and
DFC3BXL Installation Note for additional information and
field upgrade procedures.
Pluggable transceivers
support
XENPAK transceivers are supported. Refer to your software release
notes to determine which XENPAK transceivers are supported. Refer to
Appendix B for additional information on the XENPAK transceivers.
Digital Optical Monitoring
(DOM) support
Supported on some XENPAK transceivers.
Note Refer to your software release notes for specific information on
which XENPAK transceivers support DOM and the software
release required for support.
Module front panel LEDs STATUS
• Green—All diagnostics pass; the module is operational.
• Orange—The module is booting or running diagnostics; an
overtemperature condition has occurred.
LINK
• Green—The port is active (the link is connected and operational).
• Flashing orange—The port failed diagnostics and is disabled.
• Orange—The port is disabled.
• Red—The module is resetting; an overtemperature condition has
occurred.
Note If the module fails to download code and configuration
information successfully during the initial reset, the LED stays
red; the module does not come online.
• Off—The port is not active or the link is not connected.
Table 2-52 WS-X6704-10GE Ethernet Module Features (continued)
Feature Description