User guide

12
Advanced Configuration
Linksys WUMC710
Administration > Management
Use this screen to manage specific media connector functions: access to the
browser-based utility, backup of the configuration file, and reboot.
Management
Device Access
Use a password to protect access to the browser-based utility.
Device Password Enter a new Password for the media connector.
Re-enter to confirm Enter the Password again to confirm.
Idle Timeout The login times out after a period of inactivity that you specify.
The range is 60 to 3600 seconds. The default is 600.
Web Access
Access via Wireless If you are using the media connector in a public domain
where you are giving wireless access to your guests, you can disable wireless
access to the media connector’s browser-based utility. You will only be able
to access the browser-based utility via a wired connection if you disable the
setting. Keep the default, Enabled, to allow wireless access to the media
connector’s browser-based utility, or select Disabled to block wireless access
to the utility.
Backup and Restore
Backup To back up the media connector’s configuration file, click Backup
Configurations. Then follow the on-screen instructions.
Restore Click Browse and select the configuration file. Then click Restore
Configurations.
System Reboot
Reboot To reboot or restart the media connector, click Start to Reboot.
Click Save Settings to apply your changes, or click Cancel Changes to cancel
your changes.
Administration > Factory Defaults
Use this screen to restore the media connector’s configuration to its factory
default settings.
Factory Defaults
Restore Factory Defaults To reset the media connector’s settings to the
factory defaults, click Restore Factory Defaults. Any settings you have saved
will be lost when the default settings are restored.