Dot Matrix Printer User's Manual

21
Connecting the Drawer
Match the top and bottom of the drawer kick connector with the cable terminal and insert
it firmly until you hear a click.
See page 48 for detailed specifications of the interfaces.
Preparing the Printer
Drawer kick cable
 Connect only a specialized drawer. (Do not connect a telephone line.)
 Output is impossible during printing.
 Drawer 1 and drawer 2 cannot be driven simultaneously.
 Use a drawer use solenoid that is at least 24Ω. Make sure that the output current
is not higher than 1A. This may cause a malfunction or burn damage.
 Install the drawer kick cable so that it will not be caught on your shoes etc.
Caution