User's Manual slip printer CBM-820

– 7 –

2.4 Power Supply Speciﬁcations

Important!

• When using a printer power supply other than the speciﬁed AC adaptor

(31AD), be sure that the following cautions are observed.

• Use a power supply of DC 24 V ±5% and more than 1.9 A.

• Be careful about installing the printer in an area where there is noise. Take the

appropriate measures to protect against electrostatic AC line noise, etc.

Power Supply

AC Adaptor 31AD, switching type

Input AC100 to 240V 50/60Hz

Output DC 24V ± 5%, 1.9A

Plug TCP8927-83-1100 (Hoshiden brand or equivalent.)

Consumption Current

Conditions: DC 24V, excluding external equipment driving

Operating

(approximate averages)

Continuous ASCII printing + paper feed: 0.6A

Solid block printing + paper feed: 1.0A

Solid block printing: 1.9A

Peak (solid printing): 3.1A

Stand-by

(approximate averages)

Paper release deactivated: 0.24 A

Paper release activated: 0.07A