User's Manual slip printer CBM-820

– 38 –

[Function] Prints and Ejects Single Sheet, and Prints and Returns in Paper Mode

[Code] ASCII FF

Hexadecimal 0C

Decimal 12

There is the following difference between the standard mode and page mode:

[Outline] This command prints the data in the print buffer and ejects a single sheet.

[Caution] • If a single sheet ejection length by ESC C has not been set, the paper will be ejected

completely. If it has been set, the paper will be ejected by a set amount. If the no-paper

condition is detected halfway ejection, the printer will stop paper ejection even before

reaching the set ejection amount.

• The single sheet ejecting direction is speciﬁed by ESC F.

[See Also] ESC F, ESC C

[Outline] Prints in batch the data developed across the print area and returns to the standard mode.

When this is done, all the developed data are erased after printing. The paper is not ejected.

[Caution] • The head of the line is assumed to be the next printing position.

[See Also] ESC L