User's Manual slip printer CBM-820

– 51 –
ESC 2
ESC 3 n
[Function] Sets 1/6-inch Line Feed
[Code] ASCII ESC 2
Hexadecimal 1B 32
Decimal 27 50
[Outline] This command sets a line feed amount per line to 1/6 inch.
[Caution] There are two kinds of line feed amounts for the standard mode and page mode.
• For the standard mode: Set to 1/6 inch.
• For the page mode: Set to 10 dots (10/72 inch)
[See Also] ESC 3
[Function] Sets Line Feed Amount
[Code] ASCII ESC 3 n
Hexadecimal 1B 33 n
Decimal 27 51 n
[Range] 0  n  255
[Outline] This command sets a line feed amount per line to n/60 inch.
[Caution] There are two kinds of set values for the standard mode and page mode. Since the printer has
the minimum paper feed pitch of 1/144 inch, the line feed amount of n/60 inch is treated as
follows:
• For the standard mode: Set an approximate value of INT((6n+5)+0.5)/72 inch.
• For the page mode: Set n/72 inch(n coordinate).
[Default] n = 10 (1/6 inch for the standard mode and 10 dots (10/72 inch for the page mode))
[See Also] ESC 2