User's Manual slip printer CBM-820

– 52 –

ESC = n

[Function] Selects Peripheral Device

[Code] ASCII ESC = n

Hexadecimal 1B 3D n

Decimal 27 61 n

[Range] 0  n  3

[Outline] This command selects a peripheral device which validates the subsequent data, depending on

a value of n.

• Each bit has the following different meanings.

• If Printer Disabled has been selected, the printer will discard all the received data until Printer

Enabled is selected with this command.

[Caution] • Even if Printer Disabled has been selected, the printer may be made off-line by operating it.

[Default] n = 1

Bit Peripheral Device Hexadecimal Decimal

0 Printer Disabled 00 0

Printer Enabled 01 1

1 Undeﬁned – –

2 Undeﬁned – –

3 Undeﬁned – –

4 Undeﬁned – –

5 Undeﬁned – –

6 Undeﬁned – –

7 Undeﬁned – –