User's Manual slip printer CBM-820

– 53 –
ESC @
ESC C n
Fnction] Initializes Printer
[Code] ASCII ESC @
Hexadecimal 1B 40
Decimal 27 64
[Outline] This command clears the data in the print buffer to initialize various settings.
[Caution] • The setting of the DIP switch is not re-read.
• The data in the reception buffer is not cleared.
[Function] Sets Single Sheet Ejection Length
[Code] ASCII ESC C n
Hexadecimal 1B 43
Decimal 27 67
[Range] 0  n 127
[Outline] This command sets a single sheet ejection length to n lines.
• If n = 0, the ejection length will not be set
[Caution] • Even if the line feed amount is changed after setting the ejection length, the latter will not
change
• The ejection length set here is meaningful only when FF is executed
[Default] n = 0
[See Also] FF