User's Manual slip printer CBM-820

– 61 –

ESC c 4 n

[Function] Selects No-paper Sensor Valid for Print Stop

[Code] ASCII ESC c 4 n

Hexadecimal 1B 63 34 n

Decimal 27 99 52 n

[Range] 0



255

[Outline] • This command selects in which status of the no-paper Sensor printing should be stopped.

Each bit has the following different meanings.

[Caution] • It is possible to select multiple sensors as a printing stop condition, but if any one of them

detects the no-paper condition, the printer will stop printing.

• The printer stops printing after printing the on-going line and feeding the paper. If the panel

switch is disabled at this time, the printer will release the paper automatically and waits for

new paper to be set.

[Default] n = 0

[See Also] ESC c 5

Bit Sensor Hexadecimal Decimal

0 Undeﬁned ––

1 Undeﬁned ––

2 Undeﬁned ––

3 Undeﬁned ––

4 TOF sensor disabled 00 0

TOF sensor enabled 10 16

5 BOF sensor disabled 00 0

BOF sensor enabled 20 32

6 Undeﬁned ––

7 Undeﬁned ––