User's Manual slip printer CBM-820

– 64 –

ESC p m t1 t2

[Function] Generates Speciﬁed Pulses

[Code] ASCII ESC p m t1 t2

Hexadecimal 1B 70 m t1 t2

Decimal 27 112 m t1 t2

[Range] m = 0, 1, 48, 49

0  t1 255

0  t2  255

[Outline] This command outputs the signal speciﬁed with t1 or t2 to the connector pin m.

• The following table lists the types of m.

• The ON time shall be t1 × 2 mS and OFF time t2 × 2 mS, respectively.

[Caution] If m goes beyond the range, this command will be ignored, processing the subsequent data as

normal data.

[See Also] 5.3 Memory Switch Settings, 7. Peripheral Unit Driver Circuit

m Connector Pin

0, 48 Drawer kick connector No. 2 pin

1, 49 Drawer kick connector No. 5 pin