Printer iDP-460 User's Manual

iDP-460 User’s Manual
43 CITIZEN
10. PRINT CONTROL FUNCTIONS
10.1 Command List
Command Function Code P200 P250 Refer to
LF Line Feed 0AH O O 32
FF Eject Paper 0CH O O 32
CAN
Clear Print Buffer and Cancel
Character Attribute
18H O O 33
NULL Pad character (NOP) 00H O O 33
DC2 Specify Red print 12H O O 33
FS Execute P-250 Mode 1CH O X 34
GS Execute P-200 Mode 1DH X O 34
RS Set Double Width Character 1EH O O 35
US Set Normal Width Mode 1FH O O 35
SO
Set Double Width Character, or
Specify High Page
0EH O O 35
SI
Normal Width Mode or Reset
Character Code
0FH O O 36
BELL Drawer Kickout(D-type only) 07H O O 37
ESC a(n); Set Line Height 1BH6H1(n)3BH O O 37
ESC b(n); Eject Paper by n-lines 1BH62H(n)3BH O O 38
ESC c Initialize 1BH63H O O 38
ESC d Request Printer Status 1BH64H X O 39
ESC e(n); Set Right Margin 1BH65H(n)3BH X O 39
ESC h(n); Select Character Set 1BH68H(n)3BH O O 40
ESC i Identify Printer 1BH69H X O 41
ESC x Select P-900R Mode 1BH78H O O 41
* P250 represents both P-250 and P-900R modes.
P-250 mode basically equals to P-900R except the printer ID and some status sent to the
host from the printer. Refer to the attached “Detail of Commands”.
* P200 represents the P-200 mode.
* O: Command enable, X: Command disable
* (n) in the command indicates the character code 30ch to 39ch.
* n m in the code indicates the character codes 00h to FFh.