LINE THERMAL PRINTER User's Manual iDP3240

— 24 —

Starting hexadecimal dump

Open the top cover.

While pressing the FEED switch, turn

on the power of the printer “

➀”.

When you close the cover “➁”, a

message “Hexadecimal Dump” is

printed on paper, and then the data

received afterward is printed in

hexadecimal numbers and the

corresponding characters.

• If a character is not available

corresponding to the data received,

“ . ” is printed instead.

• During hexadecimal dump, no

other functions than DLE EOT and

DLE ENQ work.

• If the data received is not enough

for a full line, pressing the FEED

switch causes the line to be

printed.

Quitting hexadecimal dump

After hexadecimal printing, this

function is terminated when you

turn off the power or when a reset

signal is received from the interface.

4.11 Hexadecimal Dump

=== Hexadecimal Dump ===

Hexadecimal dump function allows data sent from the host computer to be printed in

hexadecimal numbers as well as in characters corresponding to the numbers.