Setting Guide

10
Setting the Time and Calendar
11
English
2) Setting the date
Pull out the
crown
Set the date
Return the
crown
1 0
Pull the crown
out one ‘step’ to
position 1.
Rotate the crown to the left
(counterclockwise) to set the
date.
(The date does not change
when you rotate the crown to the
right (clockwise).)
Return the crown
to the normal
position (
0
).
Note
About the screw down crown
Release the screw lock before rotating the crown to set the time and
calendar. After setting the time and calendar, be sure to press and rotate
the crown to tighten the screw lock (p.7). If your watch does not have
a screw down crown, operations can be performed without locking or
unlocking the crown.
Setting the day
The day hand moves when the hour hand is indicating between 0 a.m.
and 5 a.m. Pay attention to a.m. and p.m. when setting the time.
Setting the date
Do not change the date while the hour hand is indicating between 9 p.m.
and 1 a.m. If you change the date during this time, the date may not
change the following day.