Instruction manual

16
17
To select a time zone (city):
1. Pull the crown out to position
1
.
The second hand moves to the 30 seconds position.
2. Rotate the crown to select the city.
• Align the mode hand to any of LAX, DEN, CHI, NYC, and LON.
• Whenever you select a city, the watch indicates the
time and date in that city.
• To use the watch in a city other than the above five
cities, set the time using the alternate time mode
(A-TM).
→
pages 26 and 27
3. Pull the crown out to position
2
.
The second hand moves and indicates the current
daylight savings time setting.
• To change the daylight savings time setting, press
and release the upper right button (B) until a tone
signal sounds.
→
pages 28 to 31
4. Push the crown in to position
0
.
The watch resumes normal operation. (The current time is indicated.)
0 1 2
Button (B)
Example: Setting to
New York
●
Table of radio controlled time zones (city)
• The cities listed in the table below may be abbreviated or spelled out, depending on the model.
• The signal station is changed depending on the selected city.
• When you use the watch in a place which is not shown in the table below, set the
time using the alternate time mode (A-TM).
• The time difference in the table below is based on the coordinated universal time (UTC).
• The stored setting for the presence of daylight savings radio signal is common to all
regions in each radio signal zone.
Indication City name Time difference Signal from...
LON London 0 Germany
NYC New York −5
U.S.A.
CHI Chicago −6
DEN Denver −7
LAX Los Angeles −8
* Transmitter
stations
→
pages 20 to 21
Selecting a time zone (city)
• The time in each city is calculated from the time difference from UTC.
• When the watch receives radio signal in a city or you correct the time of a city
manually, the times in all other cities are corrected accordingly based on the time
differences. (This also applies to A-TM.)
Selecting a time zone (city)