Instruction manual

46
47
If the time, date or chronograph hands do not indicate properly, the correct
reference (0) positions may not be set.
●
What is the reference
(0) position?
The base position for all
the hands to indicate the
time and date (refer to
the figure on the right).
If the time and date
indications are off from
the correct reference (0)
position, the watch will
not indicate the time
and date correctly.
Hour/minute/second hands:
Position of 0 hour, 0
minute, 0 second
Function hand:
30 minute position
of chronograph
Day:
Middle between
31st and 1st
24 hour
hand:
0 o'clock
position
1. Pull the crown out to position
1
.
2. Rotate the crown to align the mode
hand to CHR (chronograph) mode.
3. Pull the crown out to position
2
.
All hands and the date indicator move to indicate
the current reference (0) position set in memory.
• No operations are available while the
hands and date indicator are moving.
Reference
(0) position
Next operation
Correct
Return the crown to position
0
to exit the check.
(You do not need to correct
the reference position.)
Incorrect
Correct the reference
positions. (Proceed to the
step 4 on the next page.)
0 1 2
Mode
hand
Checking and correcting the current reference (0) position
Checking and correcting the current reference (0) position
Modes supporting
this function: [CHR]