Setting Guide
Table Of Contents
- Safety precautions (IMPORTANT)
- Before using this watch
- Table of contents
- Features
- Component identification
- Charging your watch
- Using the chronograph
- Setting the World Time
- Setting Daylight Saving Time
- Notes on the time signal reception
- Checking the time signal reception
- Receiving the time signal manually (On demand reception)
- Adjusting the time/calendar manually
- Checking and correcting the current reference position
- Troubleshooting
- Eco-Drive (solar powered) watch handling precautions
- Water resistance
- Precautionary items and usage limitations
- Specifications
30
31
English
Setting Daylight Saving Time
Auto/manual adjustment of Daylight Saving Time
Ⓑ
0 1 2
S
OK
RX
NO
M
T
W
T
F
S
S
OK
RX
NO
M
T
W
T
F
S
00
50
10
20
30
80
90
4060
70
1.
Pull the crown out to position .
The chronograph 1/20 second hand indicates the
current auto/manual setting.
2.
Press and hold the lower right button Ⓐ for
two or more seconds.
Each time you hold down the lower right button
Ⓐ
for two or more seconds, the chronograph 1/20
second hand points
the 12 o’clock direction (auto)
and
the 6 o’clock direction (manual)
alternately.
3.
Push the crown in to position 0 to finish the
setting.
Setting Daylight Saving Time
Switching ON/OFF of Daylight Saving Time
Ⓑ
0 1 2
1050
20
40
ON
SMT
OFF
1.
Pull the crown out to position .
The chronograph minute hand indicates the current
daylight saving time ON/OFF setting.
2. Press and release the upper right button
Ⓑ
to adjust the daylight saving time setting.
Each time you press and release the upper right
button
Ⓑ
, the chronograph minute hand points
SMT ON
and
SMT OFF
alternately to indicate the
daylight saving time ON/OFF setting is switched.
3.
Push the crown in to position 0 to finish the
setting.
While manual setting is enabled, the daylight saving time
ON/OFF setting is not changed even when the watch
receives the time signal. Refer to the procedure described
on the previous page to change the ON/OFF setting.