Setting Guide

32
33
English
Notes on the time signal reception
There are three ways to receive the time signal:
The second hand indicates the reception result (OK/NO). (See page 41)
Methods Explanations
Automatic
reception
Receives the signal at 2:00 a.m. every day. If reception is unsuccessful, the
watch tries to receive at 3:00 a.m.
On demand
reception
Starts receiving the signal when you want to adjust the time and date.
(See page 43.)
Recovery
automatic
reception
Automatically receives the signal once after charging when the watch
stops due to insufficient charge.
Setting Daylight Saving Time
◆ The time shown for each city
The watch shows and memorizes Daylight Saving Time/standard time in
common for the following cities/time differences in each area so you do not need
to change them for each city/time differences.
• Ifyoushowthestandardtimemanuallyforacity/timedifferences,thewatch
always shows the standard time for that city/time difference regardless of the
time shown for others in the same area.
Areas receiving the signal from USA Areas receiving the signal from Germany
City Time difference City Time difference
Anchorage/ANC −9 London/LON 0
L.Angeles/LAX −8 Paris/PAR +1
Denver/DEN −7 Athens/ATH +2
Chicago/CHI −6 Azores/PDL −1
New York/NYC −5
For cities/time differences other than those listed above, the time shown last is memorized for each.
• Even when this watch receives the time signal successfully, the accuracy of the displayed
time will be dependent on the reception environment and internal processing.
• If the watch is not able to receive the signal, it will operate normally within an accuracy
range of ±15 seconds per month.