Setting Guide

40
41
English
1.
Ensure that the crown is in position 0 .
2.
Press and release the lower right button Ⓐ .
The chronograph 1/20 second hand indicates the
signal reception result.
• 
For details on the reception result, see the next page.
3.
Press and release the lower right button Ⓐ to
finish the check procedure.
• Thecurrenttimeindicationwillresume
automatically when leaving the watch for approx.
10 seconds.
Check the result of the last signal reception.
Checking the time signal reception
󱠄
0 1 2
S
OK
RX
NO
M
T
W
T
F
S
OK
RX
NO
80
90
60
70
Notes on the time signal reception
◆ When signal reception is poor
High-tension electrical lines or other structures near your house may block the
path to the signal station. This may result in a poor environment for receiving the
time signal.
With reference to pages 36 to 38, search for a better place for reception.
Then, attempt to receive the time signal following the procedure on page 43.
• Ifthewindowcontainsawirenettinginit,openthewindoworchangethe
location for better reception.
You can not perform this operation when using
the chronograph.