Setting Guide
Table Of Contents
- Safety precautions (IMPORTANT)
- Before using this watch
- Table of contents
- Features
- Component identification
- Charging your watch
- Using the chronograph
- Setting the World Time
- Setting Daylight Saving Time
- Notes on the time signal reception
- Checking the time signal reception
- Receiving the time signal manually (On demand reception)
- Adjusting the time/calendar manually
- Checking and correcting the current reference position
- Troubleshooting
- Eco-Drive (solar powered) watch handling precautions
- Water resistance
- Precautionary items and usage limitations
- Specifications
46
47
English
Adjusting the time/calendar manually Adjusting the time/calendar manually
4. Press and release the upper right button
Ⓑ
to
select the correction target.
Each time you press and release the upper right button
Ⓑ
, the correction target changes as follows and the
corresponding hand slightly moves.
①
Time (minutes/hours/24 hour time)
→
②
date
→
③
day of the week
→
④
year and month
→
back to
①
24
12
60
30
1050
2040
ON
SMT
OFF
S
OK
RX
NO
M
T
W
T
F
S
00
50
10
20
30
80
90
4060
70
Ⓑ
0 1 2
S
M
T
W
T
F
S
5.
Rotate the crown to adjust each setting.
• Ifyouspinthecrownquickly,thehandsforthetimeanddatewillmovecontinuously.
To slow down and stop them, slightly rotate the crown.
• Tomovethedateforwardorbackwardbyoneday,slightlyrotatethecrown.
• Thedatechangesatapproximately0.00am.Ittakesaboutfivesecondsforthe
displayed date to completely change.
•
Theyearandmonthareindicatedbythesecond hand.Refertothechartson
pages 48 and 49 for proper month and leap year setting.
6.
Repeat procedures 4 and 5.
7.
Push the crown in to position 0 to finish the setting.
The second hand starts moving from the 0 second position, and time/calendar indication
will resume.
• Pushinthecrownbyreferringtoareliabletimesource.
24-hour
hand
The minute, hour,
24-hour hands move
in conjunction with
one another.
③
Day of the week
When the chronograph
minute hand rotates five
times, the date advances by
one day.
④
Year and month
②
Date
①
Time
②
④
③
①
The chronograph
1/20 second
hand indicates
the day of the
week.
7: A few minutes may have elapsed during setting of the calendar and the
minutes may need correction.
Press and release the upper right button. Rotate the crown clockwise to set the current
minute.
8. Push the crown in to position [0] to finish setting.
The second hand starts moving from the 0 second position and the time/calendar
indication will resume.
For the most accurate setting, push the crown when referring to a reliable time
source.