Setting Guide

54
55
English
Troubleshooting
Troubleshooting
If you have a problem with your watch, check the table below.
Problems with time signal reception.
Symptoms Remedies Page
Reception is unsuccessful
in a receivable area.
Push the crown in to position 0.
－
Avoid things likely to interfere with the time signal and
place the watch with the 9:00 position facing toward
the station.
34
,
39
Do not move the watch until the reception has finished. 34
When the second hand moves once every two
seconds, the watch cannot receive the time signal.
Fully charge the watch.
14
The correct time and date
are not indicated after
successful reception.
Check and correct the current reference position. 51
Check the city setting. 22
Check the daylight saving time setting. 27
The hands do not work properly.
Symptoms Remedies Page
The hands move in an
unexpected direction.
Stop the chronograph.
20
The second hand moves
once every two seconds.
Fully charge the watch.
14
All hands stop moving.
Push the crown in to position 0.
－
Fully charge the watch by exposing it to direct sunlight
until the second hand starts moving once every one
seconds. After charging, signal reception automatically
starts. (Recovery automatic reception)
14
The watch does not enter
the chronograph mode.
The chronograph cannot be used when the power
reserve is at level 0. Fully charge the watch.
12
The chronograph minute
hand does not point in the
12 o’clock direction.
When the power reserve is insufficient, level 1 is
displayed for the power reserve. Fully charge the watch.
12
The hands start turning
rapidly as you take the
watch out of the case.
The watch is canceling the power save feature. Wait
until the rapid movement stops.
16