Setting Guide
14 15
<When Resuming Timing after 12 Hours have Elapsed>
• When timing has continued for 12 hours, timing is stopped automatically and each of the
chronograph hands stops at 12:00. In this case, always make sure to reset the chronograph
before additional timing since it is not reset to zero at this time.
[Reset Procedure]
1. Press button (A) to stop the chronograph.
2. Press button (B) to reset the chronograph.
• This resets the chronograph following 12 hours of timing. Timing can be resumed by
pressing button (A).
[When Chronograph Second Hand has
not been Properly Reset]
Note: Do not subject the watch to strong impacts while timing is in progress.
• The chronograph hands may rarely be shifted out of position if the watch is subjected
to a strong impact either while timing is in progress or after the chronograph has
stopped automatically after timing for 12 hours. In this case, reset the
chronograph by following the procedure described above. Promptly have your
watch repaired if any of the chronograph hands do not return to 12:00 even
if the reset procedure has been performed.
2.Press button (B) to reset the chronograph to 0 seconds after it has been stopped.
• The chronograph is not reset if button (B) is pressed while timing is in progress. To
reset the time, press button (B) after first interrupting timing by pressing button (A).
* If the chronograph is repeafedly started, stopped and restarted, the chronograph hands
may rarely shift from the 12:00 position after 12 hours have elapsed.
7
60
3
9
12
ON
O
FF
500
400
300
250
120
130
140
150
160
180
200
220
80
85
90
95
100
110
65
70
75
T
A
T
T
C
H
Y
M
E
T
E
R
60
C
HAR
G
E
45
15
Chronograph hour hand
Chronograph
second hand
Chronograph minute hand
Button (A)
Button (B)
16 17
7. Using the Alarm
• The alarm function uses a 12 hour indicator hand.
• When the alarm hand has been set to ON, the alarm sounds for 20 seconds when the set
time is reached. Furthermore, the alarm will only sound once. Since the alarm is based
on 12 hour clock, the alarm sounds twice in the AM and PM when it has been set.
• Since an indicator hand is used to set the alarm time, there is a certain degree of error in
the set alarm time. The indicator hand should be only be used as a rough indicator of the
set alarm time.
[Procedure for Setting
the Alarm Time]
1. Pull the alarm crown out to the
first click.
2. Turn the alarm crown to set
the alarm indicator hand to the
time when you want the alarm
to sound.
7
60
9
12
ON
O
FF
500
400
300
250
120
13
0
140
150
160
180
200
22
0
80
85
90
95
100
110
65
70
75
T
A
T
T
C
H
Y
M
E
T
E
R
60
C
HAR
G
E
45
15
3
Alarm crown
normal position
First click
Alarm hand
Alarm indicator hand
• In order to set the alarm time, advance the alarm indicator hand about 30 minutes past
the desired set time and then turn it back (counter-clockwise) to the desired set time.
3. Return the alarm crown to the normal position.
4. Press the alarm crown to set the alarm hand to ON.
• This completes the procedure for setting the alarm time.
[Switching the Alarm ON and OFF]
• The alarm is switched between ON and OFF each time the alarm crown is pressed.
[Stopping the Alarm]
• The alarm is stopped by pressing the alarm crown while the alarm is sounding. Note
that the alarm hand will also simultaneously be switched to OFF.
• Always make sure to wait at least 20 minutes before setting the alarm to ON again.
The alarm will sound again if the alarm hand is set to ON before 20 minutes have
passed since the alarm last sounded.
Alarm scale