User`s manual

BD2-2860 User’s Manual

CITIZEN

GS k n [ d ] k NUL

[Function] Printing the Bar Code

[Code] <1D>H<6B>H<n> [ < d> ] k <00>H

[Range] {0 =< n =< 7} Data are described in Hex code.

[Outline] Specifying a type of bar code and printing bar codes.

• The beginning of line is considered as the next printing start position.

• Depending on the value of n, the following bar code can be selected.

d indicates a character code to be printed and k indicates the number of character to be

printed.

n (Hex) Bar Code System Maximum Columns

0 UPC-A ---

1 UPC-E ---

2 JAN13 (EAN) ---

3 JAN 8 (EAN) ---

4 CODE 39 13

5ITF 22

6 CODABAR (NW-7) 17

7 CODE 128 15

[Caution] • When data being held in the print buffer, this command is ignored.

• Regardless of the specified feed pitch, this command feeds the paper to be required to

print a bar code.

• If the character code d cannot be printed in the respective bar code system, the bar

code so far will be printed, processing the subsequent data as normal data.

• When a bar code whose number of characters to be printed is fixed has been selected,

the number of characters k have to be always made equal to the number of characters

to be printed. (The bar code is not printed when not matching.)

• When the horizontal direction exceeds one line length, the excess part is not printed.

[Default] • The initial value is not specified.