User`s manual

BD2-2860 User’s Manual

CITIZEN

GS H n

[Function] Selecting of Printing Position of HRI Code

[Code] <1D>H<48>H<n>

[Range] {0 =< n =< 3} Data is described in Hex code.

[Outline] Selecting printing position of HRI code in printing bar codes.

• "n" means the followings.

n (Hex) Printing Position

0 No printing

1 Above the bar code

2 Below the bar code

3 Both above and below the bar code

The HRI code refers to the bar code-turned characters so that you can read them.

[Caution] The HRI code is printed in the font selected with GS f. Specify before the GS k command.

[Default] • The initial value of n is "0".

[See Also] GS f

[Sample Program] [Print Results]

LPRINT CHR$ (&H1B) + "3" + CHR$ (5);

LPRINT CHR$ (&H1D) + "h" + CHR$ (50);

LPRINT CHR$ (&H1D) + "H" + CHR$ (0);

GOSUB BC

LPRINT CHR$ (&H1D) + "H" + CHR$ (1);

GOSUB BC

LPRINT CHR$ (&H1D) + "H" + CHR$ (2);

GOSUB BC

LPRINT CHR$ (&H1D) + "H" + CHR$ (3);

GOSUB BC

END

BC:

LPRINT CHR$ (&H1D) + "k”;

LPRINT CHR$ (4);

LPRINT "12" + CHR$ (0);

LPRINT CHR$ (&HA);

RETURN