Specifications

B. SETTING THE TIME AND CALENDAR

Setting the time

1. Stop the second hand by pulling out the crown.

2. Turn the crown to set the time.

3. After setting the time, firmly push the crown back into its normal position.

A. BEFORE USING

This watch is not powered by a conventional battery, but is powered by

converting light to electrical energy.

Once fully charged, the watch will continue to run for approximately 6 months

without additional charging. We do recommend exposing your watch to light

every day to ensure optimum performance. Always be sure to recharge the

watch before it stops.

Your watch features an Overcharge Prevention Function so there is no need to

worry about overcharging your watch.

A special energy storage cell is used to store electrical energy. This special cell

does not

require replacement and is a clean energy unit that does not use any

toxic substances.

Time-setting position

Crown

Solar cell

Normal position

[1] Three-hand models without calendar display

* If your watch has a screw-type crown, lift up the crown to loosen it before

operation. Be sure to press the crown down firmly after operation.

Before using, be sure to fully charge your watch by exposing it to light.

(See “F. TIME REQUIRED FOR CHARGING”, for charge time reference)

#01_CTZ-B8036_英語 2008.12.3 18:50 ページ2