Instruction manual

The following two alarm functions are provided as dive alarms used in this

watch.

1. Depth alarm function: When the set depth is reached during a dive, the

alarm will beep for 15 seconds. The depth alarm

setting range is 1m to 80 m/4 ft to 260 ft (units of

1 m/4 ft). If you continue to dive deeper than the

set depth alarm, every minutes the alarm can be

activated repeatedly.

The number of times the alarm will be activated

can be chosen from 0 to 5 or every minutes.

* The number of times the alarm will sound during

one dive is preset on the watch. For example, if

you set the number of times at “1”, the alarm

sounds only once during one dive.

2. Dive time alarm function: When the set time comes after starting a dive, the

alarm will beep for 15 seconds.

This alarm will not be repeated.

* If the ascending speed is over 1.5 m (5 ft) for 10 seconds during a dive, the

ascending speed alarm will beep for the duration of at least 10 seconds to

alert the diver of overspeed.

H. DIVE ALARM MODES

(Note) The alarms may be hard to hear depend-

ing on the surroundings (such as the

sound of air bubbles) and the watch wear-

ing conditions, so take care in using the

alarm.

Depth alarm

Dive time alarm

MAX

SEL

STA

RES

SET

DIV

STP

SEL