Instruction manual

water sports and skin div-

ing (without air tank)

scuba diving (with air tank)

saturated diving (helium

gas)

pulling the crown out when

the watch is wet

OK OK NO NO

2. Pressure Sensor

• Never disassemble the sensor cover which protects the pressure sensor.

• Be careful that foreign objects such as sand, dust or other matter does not

enter into the sensor. If such objects has entered into the sensor, wash it

away with fresh water. Do not use alcohol, gasoline, thinner or other chemical

substances.

• If you cannot clean the sensor, bring the watch to the Citizen Service Center.

Indication

WATER RESIST

200 m

WATER RESIST

(ANT)

washing face or getting wet

in the rain, when splashed

over it and no water pressure

is applied to it

OK OK

Dial Case back

P. Care for long term use

Water resistance

swimming and general

washing work (kitchen

work/car washing, etc)

1. Notes on Water Resistance

a. This diver’s watch has the waterproof construction for diving up to 200 m and

withstands water pressure up to 200 m deep. The crown is screw-lock type.

Tighten the screw completely before use.

b. All maintenance services including battery replacement shall be carried out

by Citizen Service Center Repair.

c. Subject the watch to the water resistance check at the time of battery replace-

ment or every one or two years to maintain the water resistance of the watch.

Water-related use