Instruction manual

1312
Ready display
DIVE mark flashing
DIVE mark flashing
DIVE mark flashing
DIVE mark flashing
flashing
Always displays hours
Always displays minutes
Always displays seconds
Used to set analog time
Corresponding to the display before
switching (except for chrono mode)
↑
↑
Diving Mode
Depth measurement readings
Current Depth DIV turns on
Dive time
CA
—
—
Maximum depth recall/
Current temperature reading
—
—
0 m reading after depth measurement
0.0 m flashing, DIV turns on
Dive time
CA
—
—
Maximum depth recall/
Minimum temperature reading
—
—
To Time/Calendar Mode
Log Mode
*1
*2
CA
SEL
LOG
Memo (logged) recall
—
Number of log times recall
—
To Dive Alarm Mode
The dive ready state is entered.
Dive Alarm Mode
Depth Alarm
Dive Time Alarm
—
SEL
DAL
—
Dive alarm monitor
—
Dive Alarm correction Mode
To Time/Calendar Mode
The dive ready state is entered.
*1 Number of dive times/Maximum depth/Dive start time/Average depth
*2 Month and day/Dive time/Dive end time/Minimum temperature.