Instruction manual

* If none of the buttons are pressed for about 3 minutes when the display is

flashing, the watch automatically returns to the normal display.

* Pressing button (M) when the display is flashing immediately returns the

watch to the normal display.

* If none of the buttons are pressed for about 3 minutes when the watch is in

the dive alarm mode, it automatically returns to the time/calendar mode.

Each of the alarm tones of the depth alarm, dive time alarm and rapid ascent

warning alarm can be monitored for about 4 seconds each in that order by

pressing button (A) in the dive alarm mode. Each alarm tone can be heard in

sequence for as long as button (A) is pressed.

(3) Press button (A) to set the depth. (Pressing button (A) continuously causes

the characters to advance rapidly.)

Each time button (A) is pressed, the depth increases by 1 meter.

(4) Press button (B). The display indicating the number of times the alarm

sounds flashes.

(5) Press button (A) to set the number of times the alarm sounds.

• When desiring to have the depth alarm sound repeatedly, set the charac-

ters to “ON”, and when desiring to have the alarm not sound at all, set the

characters to “OFF”.

(6) Press button (B). The dive time display flashes.

(7) Each time button (A) is pressed, the dive time increases in 5 minute incre-

ments.

• When desiring to have the dive time alarm not sound at all, set the dive

time to “

——

”.

(8) Press button (M) to return the watch to the normal display.