Instruction manual

(2) When button (A) is pressed during point (P1 through P6) and barometric

pressure display, the time at that time is stored in memory in the form of a

time memo. After this procedure, the point number (P1 through P6) and

time are displayed for 10 seconds.

(3) Pressing button (A) during display of the point number (P1 through P6) and

time returns the watch to the altitude measurement display.

Temperature is displayed for about 10 seconds when button (B) is pressed for

at least 2 seconds during the fixed duration altitude measurement display. The

watch also alternates between display of altitude and barometric pressure dur-

ing this time.

(1) Press button (A) for at least 2 seconds during the continuous altitude mea-

surement display or fixed duration altitude measurement display. A tone

confirming button operation sounds and the altitude and barometric pres-

sure at that time are stored in memory in the form of an altitude memo.

After this procedure, the point number (P1 through P6) and barometric

pressure are displayed for 10 seconds.

Elapsed time

(B)

Temperature

Point no.

Barometric pressure Time

<Altitude Measurement

Display>

<Altitude / Barometric

Pressure Memo Display>

(A)

((A))

(A)