1. Features This watch is an analog quartz watch equipped with features including a 24 hour display and chronograph function. 1. Features ........................................................................................................... 3 2. Displays and Buttons ...................................................................................... 3 3. Setting the Time .............................................................................................. 4 2.
. Setting the Time Minute hand 1. Pull the crown out to the time correction position when the second hand has reached the 0 seconds position. 2. Turn the crown to set the time. * The 24 hour hand moves in conjunction with the hour hand. Pay attention to AM and PM when setting the time. 3. Securely return the crown to the normal position in synchronization with a telephone or other time service.
. Setting the Date 1. Pull the crown out to the date correction position. 2. Turn the crown to the right to set the date. * The crown turns freely and the date does not change if the crown is turned to the left. * If the date is set while the time on the watch is between the hours of about 9:00 PM and 1:00 AM, the date may not change on the following day. If this happens, set the date after temporarily moving the hands to a time other than between the above times. * The date is based on a 31-day calendar.
. Using the Chronograph [Chronograph Timing] The chronograph function of this watch is able to measure and display elapsed time up to 59 minutes 59 seconds in 1 second units. After the chronograph displays elapsed time for 59 minutes 59 seconds, it resumes timing from 0 seconds. The chronograph minute hand continues to move until the chronograph is stopped by pressing button (A) even after 59 minutes 59 seconds have elapsed. 1. Start timing by pressing button (A).
. Zero Positioning of Chronograph Hands (After Replacing the Battery) When resetting the chronograph after replacing the battery, if the chronograph second hand does not return to the 0 seconds position or if the chronograph second hand has shifted out of position due to a strong impact, perform zero positioning of the chronograph hands according to the procedure described below. [Chronograph Hand Zero Positioning] 1. Pull the crown out to the time correction position. 2.
. Precautions For correct use within the design limits of the watch, confirm the level of waterresistance of your watch, as indicated on the dial and case, and consult the table. WARNING: Water-resistance performance There are several types of water-resistant watches, as shown in the following table. Examples of use The unit "bar" is roughly equal to 1 atmosphere. * WATER RESIST(ANT) xx bar may also be indicated as W.R. xx bar.
• Water-resistance for daily use (to 3 atmospheres): This type of watch is waterresistant to minor exposure to water. For example, you may wear the watch while washing your face; however, it is not designed for use underwater. • Upgraded water-resistance for daily use (to 5 atmospheres): This type of watch is water-resistant to moderate exposure to water. You may wear the watch while swimming; however, it is not designed for use while skin diving.
WARNING: Handling of the battery • Keep the battery out of the reach of small children. If a child swallows the battery, contact a physician immediately. CAUTION: Replacing the battery • For replacement of the battery, take your watch to your dealer or Citizen Service Center. • Replace the battery as soon as possible if the service life of the battery has expired. Leaving a depleted battery in the watch may result in leakage, which can damage the watch severely.
If solvents, such as thinner and benzine, or substances containing such solvents come in contact with the watch, discoloration, melting, cracking, etc. may result. If the watch comes in contact with mercury used in thermometers,the case, band or other parts may become discolored. Periodical inspections Your watch needs inspection once in every two or three years for safety and long use. To keep your watch water-resistant, the packing needs to be replaced regularly.
