Table of contents Parts identification . . . . . . . . . . . . . . . 2 Preparation 1: Confirming the time signal reception and power reserve . . . . 4 2: Checking the reference position of the hands . . . . . . . . . . 6 3: Setting the city . . . . . . . . . . . . . . 7 Using the chronograph . . . . . . . . . . . 10 Using the world time . . . . . . . . . . . . . 11 Using the alarm. . . . . . . . . . . . . . . . . . 12 Setting the daylight saving time . . . 14 Notes on the time signal . . . . . . . . . .
Parts identification Signal reception indication (NO/RX/H/M/L) Chronograph second hand Chronograph minute hand 24-hour hand Power reserve indication H RX NO M Alarm indication L Upper right button (B) ON 24 15 20 4 16 8 30 50 MA 10 40 US 20 30 JP N D Second hand 60 ST AU Scale* SMT MA Crown for the scale* AU Daylight saving time indication 12 OFF 45 ALM 60 Hour hand Crown CHI N SC YC L 㻣 Minute hand Lower right button (A) A EUR CHN Date indication City indication S
How to use the screw down crown and screw down push button Some models feature a screw down crown and screw down push button. Locking the crown and button prevents accidental operation. Unlock them when you want to operate the watch. Unlock Lock Screw down crown Rotate the crown counterclockwise (left) until it releases from the case. Rotate the crown clockwise (right) while pushing it in, and tighten firmly.
Preparation 1: Confirming the time signal reception and power reserve You must confirm the signal reception result and charge level at first before use. 1. Ensure that the crown is in position 0. 2. Press the lower right button (A). 012 The chronograph second hand indicates the signal reception result and the chronograph minute hand indicates the current power reserve level. A Crown position • See the next page to show the indications. 3. Press the lower right button (A) to return to normal operation.
The indication of the signal reception result For in depth information on the receiving, see page 22. Indication Result H M L The indication of the power reserve level 60 Indication 45 60 15 30 Power duration About six days 45 60 15 30 45 60 15 45 30 15 30 About six to 35 days About 35 to 150 days About 150 to 240 days Charge the watch at once. The indication is not so precisely. Charge the watch frequently . See page 44.
2: Checking the reference position of the hands If the reference position is incorrect, the time and calendar are not indicated properly. 012 B 1. Ensure that the crown is in position 0. 2. Press and hold the upper right button (B) for ten seconds. The hands moves quickly to show the current reference position. Crown position The correct reference position is when; • all hands are indicating 12:00; • the date indication is between “31” and “1”.
3: Setting the city You can select your home or favorite city from 26 cities in the world. 1. Pull the crown out to position 1. 012 The chronograph second hand indicates the daylight saving time setting. 2. Rotate the crown to select the city. Crown position HKG T AD YO L Crown 012 • Refer to the pages 8 and 9. • Adjust the position of the city name to the center of the window. • Each time you change the city, the time of the selected city is shown. 3. Push the crown in to position 0.
Table of the city names Indication City name Time difference Signal station UTC LON − − London 0 0 PAR Paris +1 CAI Cairo +2 8 Moscow Delhi +3 +4 +5 +5.5 DAC Dhaka +6 BKK Bangkok +7 HKG Hong Kong +8 TYO Tokyo ADL Adelaide MOW DXB KHI DEL Dubai Karachi +9 +9.5 EUR CHN JPN The signal station is changed depending on the selected city. Some cities cannot receive the signal though the signal station is assigned in the list.
Indication City name Time difference SYD Sydney +10 NOU AKL MDY HNL ANC LAX DEN Noumea Denver +11 +12 -11 -10 -9 -8 -7 CHI Chicago -6 NYC SCL RIO New York Rio de Janeiro -5 -4 -3 FEN Fernando de Noronha -2 PDL Azores -1 Auckland Midway Island Honolulu Anchorage Los Angeles Santiago Signal station JPN USA EUR 9
Using the chronograph You can record up to 60 minutes in increments of 0.2 seconds. 012 B 1. Ensure that the crown is in position 0. 2. Press the upper right button (B) to start timing. The chronograph second hand starts timing. 3. Press the upper right button (B) to stop Crown position timing. • Pressing the upper right button (B) restarts timing. • You have to reset the chronograph after timing for using other functions.
Using the world time You can display a local time among 26 cities or UTC. 1. Pull the crown out to position 1. 012 The chronograph second hand indicates the daylight saving time setting. 2. Rotate the crown to select the city. Crown position HKG T AD YO L Crown 012 • Refer to the pages 8 and 9. • Adjust the position of the city name to the center of the window. • You can change the daylight saving time setting by pressing the lower right button (A). Refer to page 14. 3.
Using the alarm 1. Pull the crown out to position 2. 012 The chronograph second hand moves to indicate the alarm on/off setting while the hour and minute hands move to indicate the current alarm time setting. Crown position Crown B 24 4 A 12 8 2. Rotate the crown to set the alarm time. • The hands start to move continuously by rotating the crown quickly. To stop the rapid movement, rotate the crown.
To stop the alarm tone Press the upper or lower right button (A or B). • The alarm tone sounds for 15 seconds and then stop if a button is not pressed. When using world time The alarm tone sounds based on the time of the selected city. • The alarm cannot be set for each city. To confirm the alarm tone Pull the crown out to position 2 and press and hold the lower right button (A) for two or more seconds.
Setting the daylight saving time In regions where the daylight saving time (DST) is in effect, the time signal includes the daylight saving time check signal. • When “UTC” is selected as the city, you cannot change the setting. 1. Pull the crown out to position 1. 012 The chronograph second hand indicates the daylight saving time setting. A Crown position 30 012 2. Press the lower right button (A) to change the daylight saving time setting.
About the daylight saving time setting Select the daylight saving time setting to fit the implementation of the daylight saving time. Status Setting Clock indication Daylight saving is not performed. STD MA manual The watch always shows the standard time. Daylight saving starts/ ends out of sync with the time signal. SMT MA manual The watch always shows the daylight saving time. You need change the setting each time the daylight saving starts/ends.
Notes on the time signal This watch receives the time signal from the five signal stations located in four regions and automatically adjusts the time and calendar.
JJY： Kyushu station JJY： Fukushima station 17
WWVB： Fort Collins station 18
DCF77： Mainflingen station BPC： Shangqui station 19
Receiving the time signal manually (On-demand reception) You can adjust the watch by receiving the time signal any time when the time is not correct or the reception result is “NO”. • You must be in an area that you can receive a time signal. • Before attempting on demand reception, be sure to reset the chronograph. 1. Ensure that the crown is in position 0. 2. Press and hold the lower right button (A) 012 A Crown position 30 60 50 10 40 20 30 60 24 15 20 20 AD for two or more seconds.
Notes on indications for the time signal reception The chronograph second hand shows the current or last status of the reception. Status Meanings RX Ready for reception. H Very good condition for reception. M Good condition for reception. L Not good condition for reception. Change the place for reception to indicate “H” or “M”. NO “H”, “M”, and “L” only indicate the condition for reception, and are not related to the performance of the watch. The reception is unsuccessful.
Notes on the reception of the time signal Receiving the time signal There are three ways to receive the time signal: Methods Automatic reception Explanations Receives the signal at 2:00 a.m. every day. If reception is unsuccessful, then, the watch tries to receive at 3:00 a.m. and 4:00 a.m. Receives the signal when you want to adjust the time and calendar. See page On demand reception 20.
• Even when this watch receives a time signal successfully, the accuracy of displayed time will be dependent on the reception environment and internal processing. • If the watch is not able to receive a signal, it will operate normally within an accuracy range of ±15 seconds per month. When receiving the time signal Remove the watch and place it on a stable surface where it can receive the signal better, such as next to a window. • The reception antenna is located at the 9:00 position of the watch.
Poor reception areas It may be difficult to receive the time signal properly under certain environmental conditions or in areas susceptible to radio noise.
When signal reception is poor The surroundings near your house, such as high-tension electrical lines or structures may block the path to the signal location, this can cause a poor environment for receiving the time signal. With reference to pages 17 to 24, search for a better place for reception. Then, attempt to receive the time signal in the procedure on pages 20. • When the reception result is “L”, place the watch in another location so that “H” or “M” is indicated.
Setting the time/calendar manually You can adjust the watch manually when the reception fails or you are unable to receive a signal. 012 B 1. Pull the crown out to position 1. The chronograph second hand indicates the daylight saving time setting. • You can change the city by rotating the crown. Refer to the pages 8 and 9. 2. Press the upper right button (B). Crown position 012 The chronograph second hand moves to the 30 second position. 3. Pull the crown out to position 2.
• Each time you press the upper right button (B), the item selection changes in the following order (the selected item moves a little to indicate the selection): Minute/Second hand → Hour/24-hour hand → Date → Year/Month → To the beginning B Crown B 012 Crown position 5. Rotate the crown to adjust the selected item. • When selecting the date and time for adjustment, the selected item starts to move continuously by rotating the crown quickly. To stop the rapid movement, rotate the crown.
Month and year indications The year and month are indicated by the chronograph second hand. Nov. Dec. Jan. Oct. Leap year Sep. Feb. Aug. Mar. 1st year since leap year Jul. Apr. Jun. e.g. When it is March in the leap year May The position of the chronograph second hand shows the month. 28 2nd year since leap year 3rd year since leap year Each minute mark denotes the number of years since a leap year.
The figure shows May in the 1st year from the recent leap year (e.g. 2009). The figure shows September in the 3rd year from the recent leap year (e.g. 2011). Quick reference chart for number of years passed since leap year Indication of the chronograph second hand Passed year Year Hour marker Leap year 1st min. marker 1st year 2012, 2016, 2020 2009, 2013, 2017 2nd min. marker 2nd year 2010, 2014, 2018 3rd min.
Adjusting the reference position • Before the operation below, be sure to reset the chronograph. • See the next page to check the correct position for each item. 012 B for ten seconds. The chronograph second hand starts moving. Then, all hands moves quickly to show the current reference position. Crown position 012 1. Ensure that the crown is in position 0. 2. Press and hold the upper right button (B) 3. Pull the crown out to position 2. B The reference position can now be adjusted. 4.
012 Crown Crown position • Each time you press the upper right button (B), the item selection changes in the following order (the selected item moves a little to indicate the selection): Chronograph minute hand/Date → Hour/24-hour hand → Minute/Second hand → Chronograph second hand → To the beginning 5. Rotate the crown to adjust the selected item. HKG T AD YO L 㻟㻝 㻝 The correct reference position is when; • all hands are indicating 12:00; • the date indication is between “31” and “1”.
Using the calculation scales 70 NAUT . H RX NO 0 7:0 JPN 13 US. 2:3 1 5 4 5 0 16 16 4:3 12 4 GA L. 1 1 1 6:00 0 IMP GAL.11 KM. A EUR CHN 17 17 3:00 4:0 3:30 18 19 20 21 18 19 20 22 23 21 22 0 24 23 2 5 5 24 2 Crown for the scale 2:00 20 30 11 40 US 1:50 10 1:40 CHI N SC YC L 60 50 8 10 12 OFF 4 16 . LBS1 24 20 15 D ST AU 0 0 OIL 40 S. 8 90 L 30 5:00 LB 8 0 ALM 35 T.
Calculating the navigation plan Required time A 4 5 22 0 ST A 0 23 T. 8 1: 20 0 7: 40 00 US .1 1:1 6:00 30 4: 5 16 S. 5 ER LIT 17 0 3:30 3:00 0 21 22 18 19 2 55 60 00 23 24 5 .8 2: 1 5 2 70 BS 4 4 0 1 0 4: 30 35 KM. 2:00 5:00 11 1:50 30 30 1:40 10 4 FU EL L 12 0 0 1:3 35 21 NAUT .7 9:00 90 IMP GAL. . 11 OIL LBS10 0 8: 19 2 0 5 90 50 18 2 3 G 4 1 L. 17 55 4 2 Answer Align "18" on the scale to "▲".
Speed (ground speed) . AL 4 5 0 1:1 22 00 ST A 0 23 T. 8 1: 20 0 7: 40 00 US .1 21 NAUT .7 9:00 10 5:00 1 30 4: 5 4 5 16 S. 5 ER LIT 17 0 3:00 3:30 18 19 20 21 55 22 00 23 24 5 2 70 B 2: 4 0 4 1 0 S. 8 3 4: 0 KM. 35 2:00 30 11 1:50 FU EL L 60 34 30 1:40 6:00 12 19 2 0 0 1:3 35 8: 18 90 IMP GAL. .
Flying distance 18 19 17 50 6 1 T. 8 1: 20 0 7: 40 00 4 ST A 0 5:00 30 4: 16 4: 55 17 60 3:00 3:30 18 19 20 21 70 22 FU E L 00 23 24 LBS .8 0 5 2 9 30 5 0 2: 1 0 L.11 30 45 4 LIT ER S. 1 5 GA IMP . 0 BS1 KM. 2:00 40 11 1:50 LL OI 35 1:40 10 6:00 3 GAL .1 00 0 1:3 US. 1 25 0 1:1 90 35 NAUT .
Fuel consumption rate 20 17 4 5 20 0 7: 40 00 1: 5:00 KM. 2:00 2: 1 30 4: 5 6 0 16 17 3:00 3:30 18 19 20 21 70 FUEL LBS. 80 22 00 23 5 24 90 2 OIL LB S1 . P IM 5 5 4 1 L. 1 GA 3 4: 0 0 S. 5 1 0 36 45 LITE R 11 1:50 30 10 6:00 16 T. 8 40 15 00 ST A 0 35 35 0 0 1:1 1:40 AL US. 13 G . 14 8: 3 NAUT .
Fuel consumption 0 21 2 9 18 4 5 T. 8 1: 20 0 00 17 ST A 0 7: 1:40 5:00 30 30 4: 4: 16 17 70 3:00 3:30 18 19 20 21 FU E L L B S. 80 22 00 23 90 O 5 24 IL L 2 1 . BS L 30 5 GA 1 0 1 .1 2: 4 55 1 6 0I US. 13 11 KM. 2:00 45 LITERS.5 0 1:50 12 10 6:00 40 00 40 16 1:1 0 1:3 15 0 9:00 90 35 8: 30 NAUT .7 55 50 1 GAL.
Maximum flying hours 19 18 4 5 T. 8 1: 20 0 7: 40 00 15 ST A 0 6:00 10 1:40 12 5:00 3 4: 0 2: 1 30 4: 5 5 5 16 60 17 3:30 3:00 18 19 20 21 70 FU E L L B S 22 00 23 24 5 2 L IL 0 4 5 1 TE RS . G IMP 0 1 30 45 LI AL.1 KM. 2:00 . 1 BS 40 11 1:50 O 0 9 .8 0 38 35 14 1:1 00 0 1:3 35 0 9:00 90 US. 13 G A L. 8: NAUT .
Conversion 19 20 50 00 ST A 0 T. 8 1: 20 0 7: 40 00 16 0 0 1:1 35 5:00 1 5 5 2: 4 1 30 4: 5 16 6 0 .11 AL 0 4: 30 30 KM. 2:00 45 LIT ERS .5 11 1:50 17 3:00 3:30 18 19 20 21 70 F U E L L B S . 80 22 00 23 5 24 90 PG IM 40 1:40 6:00 15 3 NAUT .7 9:00 10 35 22 23 24 25 55 0 1:3 2 OIL L 0 BS 1 . US. 13 GAL.
General calculations Multiplication Question 20 × 15 LL OI 9 0 50 .1 4 1 5 0 9:00 1:1 00 ST A 0 1 6 T. 8 0 20 00 1: 7: .8 3 GAL NAUT .7 FUE L 6:00 70 35 5:00 30 KM. 25 4: 30 60 11 2:00 1 2: 4 1 30 4: 5 3 0 16 17 3:00 3:30 18 19 20 21 35 22 00 23 5 24 45 55 10 1:50 20 21 22 23 24 1:40 2 5 0 LIT ER S. 40 40 19 40 US. 1 18 0 4 5 8: 12 55 0 1:3 L BS AL.11 90 Answer G IMP 17 Align “20” on the scale to inner “10”.
Division Question 250 / 20 70 1: 20 S1 . 0 00 0 LB 0 7: 5:00 4: 16 30 30 15 KM. 2:00 2: 4 17 1 1 1 30 4: 5 8 19 16 20 17 21 3:00 3:30 18 19 20 21 24 25 22 23 22 00 23 24 5 2 3 0 35 11 1:50 US. 13 GAL. 14 10 6:00 RS. 5 OIL T. 8 12 40 00 ST A 0 1:40 45 LITE 0 1:1 0 1:3 35 8: 90 NAUT .7 9:00 90 40 50 F U E L L B S . 80 55 . 11 AL Answer 0 4 5 5 5 6 PG IM Align “25” on the scale to inner “20”. The answer “12.
Ratios Question 30 / 20 = 60 / x FU EL 0 1 1 2 T. 8 20 0 L. GA 00 1: 3 7: 14 5:00 4: 19 30 18 2: 1 21 22 30 4: 5 23 16 24 17 25 3:00 3:30 18 19 20 21 22 00 23 24 5 2 4 2 4 0 1 0 17 KM. 2:00 30 16 11 1:50 35 30 42 15 6:00 60 00 L.1 ST A 0 1:40 55 1:1 10 35 GA 0 9:00 0 1:3 . LITERS 50 0 IMP NAUT .7 55 90 40 4 5 8: 90 OIL LBS1 . . 80 50 7 45 LB S .1 US Answer Align “30” on the scale to inner “20”.
Square root Question 225 FU 0 8: 00 1 2 T. 8 20 0 00 1: 7: 14 6:00 5:00 4: 19 30 18 2: 4 0 2 1 21 1 30 4: 5 23 16 24 17 25 3:00 3:30 18 19 20 21 30 22 00 23 24 5 2 35 0 17 KM. 30 16 11 2:00 4 15 10 1:50 22 60 1 ST A 0 L. GA 40 1:1 3 55 GA L.1 0 9:00 1:40 35 0 IMP NAUT .7 55 0 1:3 . LITERS 50 90 OIL LBS1 . . 80 90 45 LB S 50 4 5 7 EL .1 US Answer Rotate the scale so that an inner value to “22.
Notes on charging your watch This watch has a rechargeable cell which is charged by exposing the dial to light such as direct sunlight or fluorescent lamps. For optimal performance: • Expose the watch with the dial towards direct sunlight for several hours at least once a month. • After taking off the watch, put it in a position so that the dial is exposed to bright light, such as by a window. • Before storing the watch in a dark place for an extended period of time, be sure to charge it fully.
When the watch reaches a low charge state—insufficient charge warning function When the power reserve becomes low, the second hand moves once every two seconds—This is the insufficient charge warning function. Charge the watch by exposing the dial to light. • After the watch is charged, the second hand will move normally. See page 46. • If you have not charged the watch for six days or more since the insufficient charge warning movement began, the watch will run out power and stop.
Charging time by environment Below are the approximate times needed for charging when exposing the watch dial to light continuously. Please use this table as a reference only. Environment time to work for Illuminance (Lx) Chargingone day Under direct sunlight or cloudy weather 10000 to 100000 Charging time to start working normally when the rechargeable cell is empty 3 to 12 minutes 2 to 3 hours 20 cm under a fluorescent lamp (30 W) 3000 45 minutes 6.
Power save feature When the watch is not exposed to light for more than six days such as when you store it in the dark, all hands automatically stop to save the power. • When the crown is pulled out, the power save feature will not activate. To cancel the power save feature When the watch is exposed to light sufficient for charging, the power save feature is automatically disengaged and normal time indication will resume.
Troubleshooting If you have a problem with your watch, check the table below. Symptoms Remedies Page Problems with time signal reception. Push the crown in to position 0. Reception is unsuccessful in a receivable area. Avoid things likely to interfere with a time signal and place the watch with the 9:00 position facing toward the station. Do not move the watch until the reception is finished. When the second hand moves once every two seconds, the watch cannot receive the time signal. Charge the watch.
Symptoms The correct time and calendar are not indicated after successful reception. Remedies Check the city setting. Check and correct the reference position. Page − 30 The hands do not work properly. Some hands moves unintentionally. Stop the chronograph. 10 The second hand moves once every two seconds. Charge the watch. 44 Push the crown in to position 0. All hands stop moving. Charge the watch by exposing it to direct sunlight for five or six hours.
Symptoms Remedies Page The hands do not work properly. The hands start turning rapidly as you take it out of the case. The watch is canceling the power save feature. Wait until the rapid movement stops. 47 The time and/or date is not correct. Check the city setting. The time and/or date is wrong. 50 − Change the daylight saving time setting. 14 Check and correct the reference position. 30 Receive the time signal to adjust the time and date. 20 Set the time and date manually.
Symptoms The date changes at around 12:00 p.m. Remedies Page Check and correct the reference position. 30 Receive the time signal to adjust the time and date. 20 Adjust the time by 12 hours manually. 26 Charge the watch by exposing it to direct sunlight for five or six hours. Though the trouble is not solved after charging, contact your nearest Authorized Citizen Service Center. 44 Others The watch does not move even if the watch is charged. Push the crown in to position 0.
Resetting the watch The watch may not work properly if it is affected by static electricity or shock. In this case, you must reset the watch. Charge the watch before resetting if the power reserve level is low. 012 1. Pull the crown out to position 1. PDL U LO TC N 㻣 Crown position 012 Crown position 52 The chronograph second hand indicates the daylight saving time setting. 2. Rotate the crown to select “UTC”. • Adjust the position to the center of the window. 3. Pull the crown out to position 2.
After resetting the watch You must set the watch again in the procedure below. 1. Select a city. See page 11. • You can change the daylight saving time setting. Refer to page 14. 2. Adjust the reference position correctly. See page 30. 3. Adjust the time/calendar. Refer to page 20 to adjust the watch by receiving the time signal, refer to page 26 to adjust manually.
Precautions Warnings Handling the rechargeable cell • Do not remove the rechargeable cell. If it is removed, keep the rechargeable cell out of the reach of children to prevent ingestion. • If the rechargeable cell is swallowed, consult a doctor and seek medical treatment.
Cautions About charging • Excessively high temperature when charging the watch may cause discoloration and deformation of the components, and result in malfunction of the movement. • Do not charge the watch at a high temperature (about 50˚C/122˚F or higher). Example: - charging the watch too close to light such as an incandescent lamp or halogen lamp (Halogen lights are not recommended for charging due to their high heat output.
To avoid injury • DO NOT wear the watch where the temperature becomes extremely high—such as in a sauna. The watch may become hot and burn the skin. To avoid malfunction • DO NOT use the watch where the temperature is lower or higher than the operating temperature specified in this manual. Doing so may cause the watch to malfunction or stop.
• Avoid using the watch where it may be exposed to chemicals or corrosive gases. If solvents, such as thinners or benzine, or substances containing such solvents come in contact with the watch, discoloration, melting, cracking, etc. may occur. The case, band, or other parts may become discolored if the watch comes into contact with some household chemicals mercury that may be found in thermometers.
Warnings on water-resistance performance • Water-resistance for daily use: This type of watch is resistant to minor exposure to water such as accidental splashing. For example, you may wear the watch while washing your face; however, it is not designed to be used underwater. • Upgraded water-resistance for daily use (tested to 5 bar): This type of watch is resistant to moderate exposure to water. You may wear the watch while swimming; however, it is not designed to be used for skin diving.
Examples of use Minor exposure to water (washing face, rain, etc.) Moderate exposure to water (washing, kitchen work, swimming, etc.
Cautions on exposure to water • Be sure to use the watch with the crown pressed in fully (normal position) to ensure the water resistance. If the crown of your watch is the screw down crown, be sure to tighten it completely. • Do not operate the crown or buttons when the watch is wet. • If water has penetrated the watch, or if the inside of the glass is fogged up and does not become clear in a day, take the watch to your dealer or Citizen Service Center for repair.
Keep your watch clean • Keep your watch clean to prevent rust or dirt building up as this may stain your clothes, damage the watch or appear as black residue on your wrist. Depending on use, occasional cleaning of the exterior of your watch may be necessary. • Wipe dirt off the leather band with a soft and dry cloth to prevent it from discoloring.
Maintenance Daily maintenance • Rotate the crown while it is pressed in fully and press the buttons periodically so they do not become stuck due to accumulations of foreign matter. • Wipe off dirt, perspiration, and water from the case and glass with a clean soft cloth occasionally. • To clean a metal, plastic, or rubber watchband, wash away dirt with water. Use a soft brush to remove dust and dirt stuck in the gaps in a metal band.
Information The time signal The time signal is broadcast almost continuously 24-hours a day, but may occasionally be interrupted due to maintenance. The broadcasting conditions of the time signal can be checked on the station web site. The time signal has no effect on the human body or medical equipment.
To avoid hand misalignment by impacts or magnetism Impact detection function: This function prevents unwanted movement of the hour, minute and second hands when the watch receives an impact. Hand correction function (hand reference position auto-correction function): The reference position of the hands is checked at regular intervals, and if there is any misalignment, the hour, minute and second hands are rapidly corrected to maintain the correct time.
Luminous dials and hands The paint on the dial and hands helps you with reading the time in a dark place. The luminous paint stores light (daylight or artificial light) and glows in a dark place. It is free from any radioactive substance or any other material harmful to a human body or environment. • The light emission gradually becomes weaker as time passes.
Specifications Model Timekeeping accuracy Operating temperature range H61* Type Analog solar-powered watch Within ±15 seconds per month on average (when worn at normal temperatures between +5˚C/41˚F and +35˚C/95˚F without the time signal reception) −10˚C/14˚F to +60˚C/140˚F Display functions Time: Hours, minutes, seconds, 24 hours, City: Three cities, Calendar: Date, Power reserve level: four degrees, Receiving stations: five stations in four regions (JJY: Japan, WWVB: USA, DCF77: Germany, BPC: China)
Additional functions • • • • • • • • • • • • • • Power reserve indication Overcharging prevention function Insufficient charge warning function (two-second interval movement) Energy saving function (power save feature) Receiving time signal (automatic, on demand, automatic recovery) Confirming reception status (RX, H, M, L, and NO) Indicating the result of the last reception Automatic selection of time signal stations Daylight saving time (SMT AU/MA, STD AU/MA) Chronograph (up to 60 minutes by 0.
