Operation Manual

20
Receiving the time signal manually (On-demand reception)
You can adjust the watch by receiving the time signal any time when the time is not
correct or the reception result is “NO”.
• You must be in an area that you can receive a time signal.
• Before attempting on demand reception, be sure to reset the chronograph.
1.
Ensure that the crown is in position
0
.
2.
Press and hold the lower right button (
A
)
for two or more seconds.
The watch starts to receive the signal with the
beep sound, and the chronograph second hand
moves to “RX”.
• It takes from two to 15 minutes for updating to
complete.
• The watch will not start to receive if the second hand is
moving once every two seconds (this is the insufficient
charge warning).
• The signal station is changed depending on the
selected city.
• You can cancel the reception by pressing the lower
right button (
A
) for two or more seconds.
60
15
24
20
30
60
30
1050
2040
AD
A
012
Crown position