Operation Manual

21
English
5. Press the lower right button
Ⓐ
to reset the measured time.
• Makesuretoresetthetimeafterfinishingmeasurement.
6. Press the lower right button
Ⓐ
again to return to current time indication.
• Thecurrenttimeindicationwillresumeautomaticallywhenleavingthewatchfor
approx. 3 hours.
• When30secondshaveelapsedafterthemeasurementisstarted(orrestarted),the
chronograph 1/20 second hand stops at the zero second position. However, the
measurement is still conducted.
• Thechronographcannotbeusedwhenthepowerreserveisatlevel0.Evenwhen
the power reserve is at level 1, we recommend charging the watch before using
the chronograph.
• Donotpulloutthecrownduringchronographmeasurementoperation.
The measurement will stop.
Using the chronograph