Service manual

CBM-270 Service Manual
8 CITIZEN
2. Removing the Screws from the Bottom of the Main Body
(1) Turn over the printer body.
(2) Remove two M3
´
10 (BT) screws. Then, turn back the printer body to its original position.
Do this, holding its upper and bottom covers.
3. Detaching the Printer Cover and Paper Roll
(1) Detach the printer cover. Put a finger, etc. on a convexed part from the rear of the printer
body and lift.
(2) Detach the paper roll. If the paper roll has been set in the printer, cut he surplus paper
and detach it gently. See "HOW TO REMOVE REMAINING PAPER ROLL" in the
USER'S MANUAL.