User`s manual

CBM-270 User’s Manual

CITIZEN

ESC 3 n

[Function] Setting line feed rate of minimum pitch

[Code] <1B> H <33> H <n>

[Range] 0 ≤ n ≤ 255

[Outline] The line feed rate per line is specified by n/360 inch.

Since an actual mechanical pitch is 1/203 inch, it is internally converted approximate to the

value specified with this command.

[Default] • The initial value is n = 60 (1/6 inch) (18H), being 4.23 mm line feed rate.

[Sample Program] [Print Results]

See Sample Program and Print Results for ESC 2 on Page 40.

ESC = n

[Function] Data input control

[Code] <1B> H <3D> H <n>

[Range] 0 ≤ n ≤ 255

[Outline] Selecting equipment in which data input from the host is effective.

• Each bit of n indicates as follows:

Value

Bit Equipment

0 Printer Invalid Valid

1 Not defined

2 Not defined

3 Not defined

4 Not defined

5 Not defined

6 Not defined

7 Not defined

• When the printer has not been selected, this printer abandons all the received data until it

is selected by this command.

[Caution] • Even when the printer has not been selected, it can become BUSY state through printer

operation.

• When the printer is deselected, this printer discards all the data until it is selected with this

command.

[Default] n = 1

[Sample Program] [Print Results]

LPRINT "AAAAA" ;

LPRINT CHR$ (&H1B) ; "=" ; CHR$ (0) ;

LPRINT "aaaaa" ; CHR$ (&HA) ;

LPRINT CHR$ (&H1B) ; "=" ; CHR$ (1) ;

LPRINT "AAAAA" ; CHR$ (&HA) ;

END