REF CH-452 English 1202 English INSTRUCTION MANUAL FOR DIGITAL BLOOD PRESSURE MONITOR
Contents 18 - CALLING UP THE DATA STORED IN MEMORY 20 - KEY TO DISPLAY ICONS 21 - ABOUT “BLOOD PRESSURE” 22 - BLOOD PRESSURE Q&A 23 - BEFORE REQUESTING REPAIRS OR TESTING 24 - SPECIFICATIONS Ensure that you have all the following components [OPTION] • Large Cuff (model: SCL-005) To obtain correct blood pressure measurements 1. 2. Blood pressure monitor unit Cuff (model: SCN-003) (for monitor) Instruction Manual 4 AA-size batteries 3. 4. 5. 6. 7.
Español 10. The figure below shows the blood pressure classifications under the WHO standards. 3. SYSTOLIC (mmHg) Português 180 4. Grade 3 Hypertension (severe) 5. Grade 2 Hypertension (moderate) 6. 160 Grade 1 Hypertension (mild) 140 Deutsch 130 120 Remarks: The graph is not exact, but may be used as a guide in understanding non-invasive blood pressure measurements. The device is only intended for use by adults. High-Normal Normal Optimal 80 85 90 100 110 DIASTOLIC (mmHg) 7. 8. 9. 10.
PRECAUTIONS FOR USE AND MAINTENANCE Nature and frequency of maintenance: Deutsch Warning English Español WEEE MARK If you want to dispose this product, do not mix with general household waste. There is a separate collection systems for used electronics products in accordance with legislation under the WEEE Directive (Directive 2002/96/EC) and is effective only within European Union. Information for Users on Collection and Disposal of used Batteries.
IDENTIFICATION OF PARTS Diastolic blood pressure/Pulse display Systolic blood pressure display Air hose Español Blue marker MEMORY Switch Español Português Português English Component names English IDENTIFICATION OF PARTS Metal hoop START/STOP Switch w Stand-by Italiano Battery cover Italiano Deutsch Deutsch Air hose connector Air hose socket 中文 中文 Français Français - Eng 8 - - Eng 9 -
LOADING THE BATTERIES LOADING THE BATTERIES 1 3 Close the battery cover. English English (Batteries supplied with the unit should be loaded in compartment before you use the blood pressure monitor.) Open the cover of battery compartment. Pressing the hook down, pull the cover toward you to open. Deutsch • When the icon is displayed or nothing appears in the display, replace the old batteries with four new ones. All four batteries should be changed at once.
MEASURING YOUR BLOOD PRESSURE 5 Place your arm on a table or the like, so that the center of the cuff comes to the height of your heart. Español Português Put the cuff around your arm so that the blue marker comes to the palm side. Metal hoop Blue marker Deutsch Italiano 3 * Carefully place the cuff on your arm, taking care to use the correct tightness. The tightness is correct if you can readily slide a finger between the cuff and your arm.
Español Português * 5 blinks each time a pulse is detected, and the pressure value is displayed on the diastolic blood pressure display. 6 Once measurement is complete, the cuff deflates and the measurement results (systolic/diastolic blood pressure values, pulse) are displayed. Place the cuff at the height of the heart. Press the START/STOP switch (the blue switch).
It is important to have the cuff level with your heart. 3 Open your hand slightly on the table so that your palm is facing up and your fingers are relaxed. 4 Do not move your body or talk while taking the measurement. Deutsch ■ Measurement in a reclining posture AUTOMATIC POWER OFF FEATURE * Relax yourself to avoid placing pressure on the cuff. Italiano • After taking the blood pressure measurement, pressing the “START/STOP” switch will turn the monitor off.
CALLING UP THE DATA STORED IN MEMORY English • Press the “MEMORY” switch again. This recalls and displays the second last set of data stored. Each time you press this switch, the unit displays the data prior to the last set of data displayed. Português Português HOW TO CALL UP THE DATA • Press the “MEMORY” switch. Deutsch • The value stored in memory is numbered in the order of measurements. For example, when 90 sets of data are stored in memory, the data number 1 represents the latest data.
Condition/Cause Measurement is under way. Blinking Pulse detected. Displayed during measurement. “PUL Err” is displayed when the pulse value is below 40 or above 181. (Systolic) Left ventricle The artery wall expands. Contraction Left ventricle Normal state is restored to the artery wall. Dilation Deutsch Italiano • Appears when the blood-pressure could not be measured accurately. Apply cuff properly and measure again. The pressure is 281 mmHg or higher.
Q A Português Q A Problem Response Check whether the batteries are dead. Replace all the batteries with new ones. Check whether the batteries are installed the right way round ( and oriented correctly). Load the batteries in the correct direction. No measurements can be taken. Check whether the measurement icon displayed. Attach the cuff properly. Why does the blood pressure obtained vary with measurement? Our blood pressure is adjusted by automatic nerve function.
SPECIFICATIONS English Español Português Deutsch Italiano Model Number: Measurement system: Measurement Localization Cuff: Arm circumference range: Pressure Measurement range: Pulse Pressure Accuracy: Pulse Pressure Pulse LCD displays: Icons Switch: Inflation: Deflation: Rated voltage: Exhaust: Power supply: Alkaline Battery duration: Manganese Automatic Power Off function: Dimensions: Weight: Temperature Operating conditions: Humidity Temperature Storage conditions: Humidity Electric shock protection: Deg
CITIZEN is a registered trade mark of Citizen Holdings Co., Ltd., Japan. Design and Specification are subject to change without notice.