User Manual

34
——
Minimum value Maximum value
mm inch mm inch
A Label width 21.50 0.83 118.00 4.65
B Backing paper width 25.40 1.00 118.00 4.65
C Left edge position of label 0 0 2.54 0.10
D Label gap length 2.54 0.10 2,539.75 (CL-E321)
1,270.00 (CL-E331)
99.99 (CL-E321)
50.00 (CL-E331)
E Label length 6.35 0.25 2,539.75 (CL-E321)
1,270.00 (CL-E331)
99.99 (CL-E321)
50.00 (CL-E331)
F Label pitch 8.89 0.35 2,539.75 (CL-E321)
1,270.00 (CL-E331)
99.99 (CL-E321)
50.00 (CL-E331)
G Backing paper thickness 0.06 0.0025 0.125 0.0049
H Total media thickness 0.06 0.0025 0.19 0.0075
I Notch right edge position 8.3 0.32 60.80 2.39
J Notch left edge position 0 0 57.20 2.25
K Notch length 2.54 0.10 17.80 0.70
L Black line right edge
position
15.00 0.59 66.50 2.62
M Black line left edge
position
0 0 51.50 2.02
N Black line length 3.18 0.125 17.80 0.70
 Use the transmissive sensor when using media that has both gaps between labels
and black lines.
 Use the transmissive sensor when using fanfold media.
 If the label pitch is 1 inch or less, congure an accurate label pitch with the [Small
Media Adjustment] setting.
 Use carbon-based ink with an OD value of at least 1.5 to print black lines.
 The stop position and cut position may change depending on the width or type of
media that is used.
Adjust these positions using the Paper Position setting.