User Manual
Table Of Contents
- WEEE MARK
- Compliance Statement for European Users
- GENERAL PRECAUTIONS
- SAFETY PRECAUTIONS...WHICH SHOULD BE STRICTLY OBSERVED
- Warnings
- General Precautions
- Installation Precautions
- PRECAUTIONS IN HANDLING THE PRINTER
- THE TABLE OF CONTENTS
- 1. GENERAL OUTLINE
- 2. Part Names and Function
- 3. SETUP
- 4. Configuring Printer Settings Using the Specialized Utility
- 5. Configuring Ethernet Network Settings Using Network Seeker
- 6. Configuring Printer Settings Using a Browser
- 7. Configuring the Printer Using the Operation Panel
- 8. Online Configuration Mode
- 9. Clearing Jobs Stored in the Printer
- 10. Maintenance
- 11. Appendices
45
——
11. Close the top cover.
CAUTION
When closing the top cover, push in the parts indicated by arrows with both hands until you
hear the clicking sound of the left and right hooks engaging.
If the hooks are not sufciently engaged, the print quality may be affected. If wrinkles occur in
the ribbon, press the Feeds key until there are no wrinkles.
If there are still wrinkles in the ribbon, perform the procedure described in “Adjusting the Left/
Right Balance of the Ribbon”.
Use ribbon that has the ink surface on the outer side. Ribbon that has the ink surface on the
inner side cannot be used.
If ribbon that has the ink surface on the inner side is used, the print quality may deteriorate.