User Manual
Table Of Contents
- WEEE MARK
- Compliance Statement for European Users
- GENERAL PRECAUTIONS
- SAFETY PRECAUTIONS...WHICH SHOULD BE STRICTLY OBSERVED
- Warnings
- General Precautions
- Installation Precautions
- PRECAUTIONS IN HANDLING THE PRINTER
- THE TABLE OF CONTENTS
- 1. GENERAL OUTLINE
- 2. Part Names and Function
- 3. SETUP
- 4. Configuring Printer Settings Using the Specialized Utility
- 5. Configuring Ethernet Network Settings Using Network Seeker
- 6. Configuring Printer Settings Using a Browser
- 7. Configuring the Printer Using the Operation Panel
- 8. Online Configuration Mode
- 9. Clearing Jobs Stored in the Printer
- 10. Maintenance
- 11. Appendices
69
——
3. Enter your user name and password.
The default authentication credentials for the Operator role are as follows.
User name: Operator
Password: Operator
The default authentication credentials for the Administrator role are as follows.
User name: Admin
Password: Admin
The user name and password for the Operator and Administrator roles can be changed in the
User Settings menu. User names and passwords can contain up to 20 single-byte, alpha-
numeric characters and symbols.
After successful authentication, the Home screen for the Operator or Administrator role ap-
pears.
Administrator Home Screen
The menus that appear for the User and Operator roles can be changed from the User Set-
tings menu.
4. Press the Menu button on the Home screen to perform printer operations.
Printer Information: Displays printer information.
Congure The Printer: Provides access to the same settings as congured with LabelPrint-
erUtility.
Operate The Printer: Used to operate the printer.
5. Once you are nished, press the [LOG OUT] button to log out.
The Home screen for the User role appears again after logging out.