User Manual

77
——
5. Press and hold the FEED key for at least 3 seconds.
6. Release the FEED key once the buzzer emits a long tone.
The conguration print process starts.
Once the conguration has been printed, the printer will be in the online state.
7. To print congurations that include default settings, continue pressing and holding the
FEED for at least 3 seconds without releasing your nger at step 6.
8. Release the FEED key once the buzzer emits a long tone and then press the FEED key
again.
The process to print a conguration that includes default settings starts.
Once the conguration has been printed, the printer will be in the online state.
 To cancel conguration printing, continue pressing and holding the FEED key for at
least 3 seconds without releasing your nger at step 7.
The buzzer emits 4 short tones, and the printer restarts.
7.4 Emulation switching mode
This mode is used to change the command set used.
The default setting is [DMX mode].
1. Turn on the power to the printer while pressing and holding the FEED key to start the
printer in special function mode.
2. Press the FEED key 4 times to select emulation switching mode.
The buzzer emits 4 short tone.
The status LED also ashes quickly in amber.
3. Press and hold the FEED key for at least 3 seconds.
4. Release the FEED key once the buzzer emits a long tone.
The printer is now in emulation switching mode.