User Manual
Table Of Contents
- WEEE MARK
- Compliance Statement for European Users
- GENERAL PRECAUTIONS
- SAFETY PRECAUTIONS...WHICH SHOULD BE STRICTLY OBSERVED
- Warnings
- General Precautions
- Installation Precautions
- PRECAUTIONS IN HANDLING THE PRINTER
- THE TABLE OF CONTENTS
- 1. GENERAL OUTLINE
- 2. Part Names and Function
- 3. SETUP
- 4. Configuring Printer Settings Using the Specialized Utility
- 5. Configuring Ethernet Network Settings Using Network Seeker
- 6. Configuring Printer Settings Using a Browser
- 7. Configuring the Printer Using the Operation Panel
- 8. Online Configuration Mode
- 9. Clearing Jobs Stored in the Printer
- 10. Maintenance
- 11. Appendices
81
——
8. Online Conguration Mode
1. Press and hold the FEED key for at least 3 seconds while the printer is online and not
receiving data.
The printer is now in online conguration mode.
The buzzer emits 3 short tones and the status LED ashes alternately in green and red.
2. Press the FEED key to select media sensor mode.
Media sensor mode Buzzer Status LED
Color Interval
Transmissive sensor mode 1 short tones Green Flashes
Press the FEED key ↓
Reective sensor mode 2 short tones Green Flashes quickly
Press the FEED key ↓
Continuous media mode 3 short tones Amber Flashes
Press the FEED key ↓
Thermal-transfer printing
mode
4 short tones Amber Flashes quickly
Press the FEED key ↓
Direct-thermal printing
mode
5 short tones Red Flashes
Press the FEED key ↓
Returns to the transmissive sensor mode.
3. Press and hold the FEED key for at least 3 seconds.
4. Release the FEED key once the buzzer emits a long tone.
The selected media sensor mode is set.
To cancel online conguration mode, continue pressing and holding the FEED key for
at least 3 seconds without releasing your nger at step 4.
The buzzer emits 4 short tones, and the printer restarts.