User Manual
Table Of Contents
- WEEE MARK
- Compliance Statement for European Users
- GENERAL PRECAUTIONS
- SAFETY PRECAUTIONS...WHICH SHOULD BE STRICTLY OBSERVED
- Warnings
- General Precautions
- Installation Precautions
- PRECAUTIONS IN HANDLING THE PRINTER
- THE TABLE OF CONTENTS
- 1. GENERAL OUTLINE
- 2. Part Names and Function
- 3. SETUP
- 4. Configuring Printer Settings Using the Specialized Utility
- 5. Configuring Ethernet Network Settings Using Network Seeker
- 6. Configuring Printer Settings Using a Browser
- 7. Configuring the Printer Using the Operation Panel
- 8. Online Configuration Mode
- 9. Clearing Jobs Stored in the Printer
- 10. Maintenance
- 11. Appendices
90
——
Control Languages
Supports the Datamax® language and Zebra® language
Digital Processing Components
Item Description
CPU 32-bit RISC CPU (max. operation frequency of 216 MHz)
ROM 16 MBytes of ash ROM (user area: 4 MBytes)
RAM 32 MBytes of SDRAM (user area: 4 MBytes)
Media detection sensors
Item Description
Transmissive sensor Detects label gaps, tag notches, and out of media state
Reective sensor Detects black lines on back of media and out of media state
Ribbon encoder sensor Ink ribbon end detection
Communication interfaces
Item Description
USB Full-speed USB 2.0 (12 Mbps), Type B connector
Ethernet 100BASE-TX / 10BASE-T, RJ45 connector
Serial RS232C, 9-pin D-SUB female connector
Baud rates: 2400, 4800, 9600, 19200, 38400, 57600, and 115200 bps
Indicators and switches
Item Description
LED Power on (green), status/errors/alarms (green, red, and amber)
Buzzer Alarms, warnings, and other indications
Operation keys 1 (Performs feed and other operations)
Head-up detection switch Detects head-up states
Ethernet panel button Prints and initializes Ethernet settings
Power switch Turning the Power On/Off