User`s manual

Chapter 2 Safety Precautions
-
--
-
7 -
--
-
Opening/closing the top cover
When opening/closing the top cover, be careful not to catch your
fingers between the cover and chassis.
Printhead
The printhead remains at a high temperature immediately after
printing. Therefore, be careful to avoid contact with the printhead
when replacing the ribbon or media or cleaning the printer
immediately after printing. Failure to observe this precaution may
result in burning.
The edge of the printhead can injure your bare hands and the
printhead itself can give you an electrical shock. To replace the
printhead, contact our service personnel. Never try replacement
by yourself.
Loading the media and ribbon
When loading the media and ribbon, be careful not to catch your
fingers in the mechanism.
No use for long periods
When the printer is not used for long periods, the plug of the
power cord should be removed from the outlet to ensure safety.
Printer care and cleaning
Whilst performing maintenance and cleaning, the plug of the
power cord should be removed from the outlet to ensure safety.
Do not use benzine, thinner, alcohol, etc. to wipe the dirt off the
printer. Failure to do so may cause discoloration or deformation.
If the dirt is too large, soak a cloth in a thin neutral detergent and
squeeze out and wipe with it, and finally wipe with a dry, soft
cloth.