User`s manual

Chapter 4 Media (Paper) and Ribbon
-
--
-
16 -
--
-
¨
¨¨
¨ Center-punched hole tag
Holes (2.5mm diameter) are perforated lengthwise along the central line of the tag.
¨
¨¨
¨ Black mark tag
Black marks are printed on the back of the tag at the center or on the right side in the direction of
feed.
¨
¨¨
¨ Corner-with-a-radius cut tag
The cuts on the edge of this tag are deeper than the cuts on center-hole tag.