Instruction manual

12
Clean the air filter (once per two weeks is suitable)
1. Hold the two ends of the
grille and pull it up-forward,
then draw out the air filters
downward gently (Do not
shake them,or the dust will
be raised).
2. Use vaccum cleaner or
water to clean them.Please
dry them in shade after they
have been washed.
3. Hold the two ends of the
inlet grille,install the air fil-
ters according to the
diagram,then shut the inlet
grille.


 When the machine will not be used for a long period of time:
Run it to dry the inside of
the machine.
Pull out the power plug
after switching it off.
Take out the batteries of
the remote controller.









8. Operation Experience Guide
In cooling operation, the temperature difference between indoor and outdoor should be within
5, or it will do harm to your health.
Try to reduce the invasion of outdoor heat (open the doors or windows as few as possible,
avoid the direct sunlight, try to keep the heat sources out).
The air filters shouldn’t be blocked up, or they will lower the cooling efficiency.
Adjust the vertical and horzontal air direction, make the indoor temperature evenly.
Do not let the cold air blow your body directly for a long time.
To raise the fan speed can enhance the cooling efficiency.
In heating operation, the humidity of the room should be increased properly, or you will feel dry
and uncomfortable.





















Inlet grille
Raise it then pull
it out downward
Raise it and install
it into the groove
Air filter net
If the electricity was restored after breaking off, please wait for 3 minutes, and
the unit will restart automatically and run in the latest mode.
Warning: